TRANS-LOGGER is a set of hardware and Android software used for monitoring the temperature and door status in trucks to document the transport conditions. It is essential wherever temperature-controlled supply chain of sensitive products is being monitored, so-called cold chain.
TRANS-LOGGER system consists of hardware with its own independent power supply:
recorder has a wireless WiFi connection with temperature and door
sensors, which enables to transfer of data between a cargo space of a
truck and cab. If there is an excessive impact of shielding and radio
signals attenuation caused by a metal housing of the semitrailer and
driving cab, in special cases, the so-called the
WiFi router with two antennas: one internal - radiating inside the
cargo area and a second outer - radiating toward the cab.
The data-logger supports from 1 up to 4 temperature and door sensors.
The data-logger is enabled to record measurements in user-defined intervals changed in steps of 1 minute. Data from the sensors are stored in the memory of Android recorder, which every single gigabyte allows you to store up to 100,000 measurement results.
In case of loss of the radio connection between the data-logger and
sensors, when it reconnects with sensors, the data-logger recovers all
missing measurements from sensors memory.
The data-logger allows you to set alarm thresholds (the lower
temperature threshold, the upper temperature threshold, door opening
alarm). When a threshold is exceeded, if will be displayed on the
screen and in printed reports. The data-logger prepares a report of
registered transportation condition which is printed on the printer
while delivery and stored into memory in CSV and PDF files ready to be
sent via e-mail to any email address. The report contains time stamp,
average, minimum, maximum temperature measurements calculated for the
specified time range.
The display of the data-logger allows you to preview: current temperatures in the individual controlled areas, states of door sensors, announces the exceedances of alert thresholds, and enables local overview of the history of measurements in the graphs form.
The data-logger allows you to transfer recorded measurements to
external systems and databases in a form allowing further processing
via: USB port, memory card, Bluetooth or GSM connection. In the case of
GSM connection measuring data are collected via dedicated software -
SCADA LBX program, installed in the control supervisor server - Windows
computer with a public IP address..
The data-logger is powered by an external power source 12V / 24 VDC
and its battery allows long hours of work. The recorder can have
additional mounts in the cab.
If the data-logger is integrated with printer in terminal PDA-3505-A with Android system, it works like any tablet or smartphone running Android, it allows to install additional client software for transport logistics. If the data-logger is a Tablet or a Smartphone, the external printer is connected to it via Bluetooth and can also be used to print other client documents.
Sensors, which are wireless temperature recorders LB-523TD, are independent devices with its own battery power supply. If a sensor works with an 15 minutes interval the battery will last for about 12 months without exchange. It is possible to easy replace battery, which are two R6 (AA) 1,5V cells.
Sensors LB-523TD transmit measurement data to a recorder using
WiFi wireless interface working in the 2.4 GHz band. Sensors LB-523TD
have their own non-volatile memory in which data is stored when there
is no connection to the recorder.
Temperature measurement with a resolution of 0.1°C is characterized
by the accuracy not worse than 0.3°C. The minimum number of records
stored in the memory of each of the sensors is 30000 single measures of
temperature or the time of door opening. Once the memory is full, the
oldest sensors measurements are overwritten by the latest ones.
Sensors LB-523TD have fasteners allow for easy assembly and disassembly inside the cargo area of the car.
Sensors LB-523TD, on request, can have an individual
calibration certificate for the required measurement points issued by Accredited Calibration Laboratory LAB-EL. Periodically, the sensors can be re-calibrated in laboratory to confirm proper operation.
Transport conditions reports can be sent from the device as an attachment via email to the specified email address, and can be printed on an external printer or built, which is an integral part of the PDA-3505-A. In sets with a tablet or smartphone, used independent printer connected to the recorder via Bluetooth. The printer performs printing of reports prepared by the recorder. Reports are printed on delivery to confirm the conditions of transport for thermo-sensitive paper with a width of 58 mm.
Data-logger in the cab is an Android 4.0 or higher device with WiFi, GSM and GPS interfaces and with installed TRANS-LOGGER application. The application enables all performance of the above-discussed features of TRANS-LGGER system.
TRANS-LOGGER Applications for Android allows to:
SCADA LBX computer program in the standalone version is used to: