www.label.pl | LAB-EL Elektronika Laboratoryjna
Laboratory Electronics


  • functions: thermometer (from 1 to 8 channels)
  • measurement: temperature
  • wide scope of measurement
  • optionally probes for different usage
  • 1..8 external measurement probes
Termometr LB-711


Eight-channel thermometer LB-711 is designed for temperature measurement of any media in the scope that depends on the type of measurement sensors used (maximum -200...+550 °C).

The device consists of: eight channel measurement converter, which is connected to from 1 to 8 temperature sensors (probes) containing thermometric resistors Pt1000 (Pt100). The cable's length can reach up to 10 m. In a standard version TL-2 each sensor is made in a form of a "pin" from stainless steel. In a special version the temperature sensor’s construction depends on its destination.

The thermometer is a stationary device of small size, powered from an outside power supply. It is characterized by a modern construction based on efficient and energy saving microprocessor controller and a precise A/C converter. Basing on the knowledge of nonlinear temperature sensor characteristics and digital calibration data stored during the calibration process in a device's memory - the microprocessor (built-in the device) counts the actual temperature measurement results. Those results are sent (in a digital form) from the device to a supervisory system of data collection.

The device is equipped with a digital current interface and its time course is analogous to a standard RS232C. The records for succeeding measurements results are sent from the device every few seconds. The output interface, except form data transmission is also used for powering the thermometer - using two-cable connection for this purpose (i.e.: telephone type), but the polarity of attaching the interface's cables is optional.

Thermometer LB-711 can cooperate with a reading panel (i.e. LB-724), meteorological station panel LB-741 or by using a converter LB-486 or LB-731, can be attached to an interface RS232C of any PC computer. The thermometer is also equipped with special software that allows on observation of the measurement results and their registration to a computer's hard disk.

The device does not have any mechanical calibration elements (i.e.: potentiometers). The calibration of the device is performed by sending calibration data obtained in the model climate conditions through a digital interface to a non-volatile memory of device. It guarantees comfort and high calibration accuracy as well as stability of the device's meteorological parameters in time.

Each thermometer can have an individual calibration certificate issued by the LAB-EL Calibration Laboratory or the Measurement Apparatus Laboratory of the Energy Institute in Warsaw.

Dane techniczne

Scope of measurement
-100...+200 °C Basic scope of measurement, LB-711
-200...+550 °C Extended scope of measurement, LB-711E
Scope of work temperatures
Measurement converter
-40...+80 °C
Standard measurement probe
-60...+90 °C
Special measurement probe
-200...+550 °C
Measurement resolution
0,1 °C - standard
Configured during device calibration
0,01 °C - option
Measurement inaccuracy
One point calibration Two point calibration In the scope of width
LB-711 +/- 0,1 °C,
+/- 1 last digit
+/- 0,05 °C,
+/- 1 last digit
50 °C
+/- 0,2 °C,
+/- 1 last digit
+/- 0,1 °C,
+/- 1 last digit
100 °C
+/- 0,4 °C,
+/- 1 last digit
+/- 0,2 °C,
+/- 1 last digit
200 °C
LB-711E +/- 1,5 °C,
+/- 1 last digit
+/- 0,8 °C,
+/- 1 last digit
400 °C
+/- 3,0 °C,
+/- 1 last digit
+/- 1,5 °C,
+/- 1 last digit
750 °C
Scope of voltage
8...24V DC
Energy consumption 8 mA average
25 mA maximum
Overall casing dimensions
125 x 80 x 60 mm plus passes for wires
Material, level of casing protection
ABS, polymas IP 65


Transmission parameters: in accordance with RS232C, 300 bps, 7 information bits, without the evenness control, 1 stop bit working in a standard of a digital current loop.
  • TXD - constant measurement result transmission and powering a thermometer,
  • RXD - storing device calibration data in its nonvolatile memory.


The following versions are available upon a special order:
  • LB-711E - with extended scope of measured temperatures: -200...+550 °C,
  • LB-711X - for cooperation with a themoresistor Pt1000 (standard version),
  • LB-711U- for cooperation with a themoresistor Pt100.
See also
See also
LB-710AL LB-710AL
Hytherograph LB-710AL is designed for air temperature and relative humidity measurement in closed places (museums, warehouses, archives, laboratories)
LB-710AT LB-710AT
Rozdzielczość pomiaru temperatury 0,01°C. Wyświetlacz LCD bieżącego wyniku pomiaru. Dwuprzewodowy cyfrowy interfejs S300. Do zastosowania w dużych wieloczujnikowych systemach monitorowania mikroklimatu w przemyśle farmaceutycznym i spożywczym, dla spełnienia najwyższych wymagań systemów jakości. Możliwość adiustacji (regulacji) i wystawienia świadectwa wzorcowania w laboratorium akredytowanym.
LB-718T LB-718T
Zakres pomiaru zależny od konstrukcji zewnętrznego czujnika temperatury, maksymalnie do -200..+550°C. Cyfrowy interfejs RS-485 w standardzie MODBUS RTU. Wbudowany wyświetlacz LCD.
Ocena produktu
8-channel thermometer LB-711 is designed for temperature measurement of any media in the scope that depends on the type of measurement sensors used
Ocena: 5/5, liczba głosów: 14
  • dodaj swoją ocenę