www.label.pl | LAB-EL Elektronika Laboratoryjna
Laboratory Electronics

Temperature supervision in the transportation means


Monitoring w transporcie HACCP

Supervision in transport

The temperature recorders introduced below are especially useful for temperature monitoring in the transportation means. A detailed description of those devices can be found in the relevant leaflets. The devices meet all of the requirements introduced in the following document:

  • The Health Ministry Order dated December 19, 2002 concerning the sanitary requirements that apply to food transport as well as substances used in food processing, allowed additional substances and other food components (Dz. U. z 2003 r. Nr 21 z dnia 10.02.2003r , poz. 179).

Thermograph/ temperature mini recorder LB-515

Termometr LB-515The recorder LB-515 is designed for technology processes control and documentation in the production plants especially in the medical and food industry. It can be used for climate parameters control during the transportation of goods sensitive to temperature changes. It can be placed in the boxes along with the transported goods. It is especially useful for meeting the quality control requirements of production and in transport means.

LB-515 is a super mini temperature recorder powered from the built in long lasting lithium battery. The device uses a built in temperature sensor for measurement.

LB-515 is a wireless device, fully autonomous (when registering it does not require a computer). Recorder programming (for example setting the pauses between the registering sessions, the way in which the registry gests started) and then reading as well as presentation and recordings printout is done using a computer with an attached to the COM port reader LB-514. Data transmission between the recorder LB-515 and the computer is performed after starting the program LBX-500 on a PC computer.

The recorder is equipped with a memory for storing the measurement results, which for example when the registry breaks are set for every 60 minutes lasts for over 12 weeks of entry storing in one registry sessions. It is possible that storing can take place in 2 modes "to the full" (the registry is stopped when the memory is full) and "with overwriting" (the oldest recordings are deleted when the memory is full). The registry begins after pressing the button placed on the device casing or at a certain set time.

Except for storing the measurement data in the required registry periods the recorder LB-515 can form a histogram, which encloses information about the occurrence statistics of the registered measurement values in the set intervals. The temperature measurement range was divided for this purpose to 63 intervals where each of them is 2°C width. Other interval histogram widths are also available. Knowing a certain histogram helps the user on quick measurement result analysis performed during the registry process without the need of reading the whole device memory content.

The recorder also allows on setting the temperature threshold values (upper and lower) where exceeding them is signaled (after pressing the button) by flashing colorful diodes. The device registers 12 time intervals where the lower and upper temperature level threshold were exceeded adequately.

Thermograph/ temperature mini recorder LB-520T

Termometr LB-520T The recorder LB-520T is designed for control and technological process run documentation in the production plants especially in the medical and food industry. It can be used for climate parameter registry (temperature or in the version LB-520: temperature and humidity) inside the vehicles or inside the boxes during the transportation of the temperature sensitive products. It is especially useful for meeting the production quality control requirements ISO and HACCP.

LB-520T is a wireless device, fully autonomous (when registering it does not require a computer). Recorder programming (for example setting the pauses between the registering sessions, the way in which the registry gests started) and then reading as well as presentation and recordings printout is done using a computer with an attached to the COM port reader LB-521. Data transmission between the recorder LB-520 and a reader LB-521 attached to a computer is performed wirelessly using an optical IR connection.

LB-520T is a super mini temperature recorder (and in version LB-520 relative humidity) powered from the built in long lasting lithium battery. The measurement results are presented on a big easy to read screen. The device uses a built in or an outside temperature sensor (on a cable) for measurement.

The recorder is equipped with a big memory for storing the measurement results, which for example when setting the registry breaks to every 25 minutes lasts for over a year of storing en tries in one registry session. It is possible that storing can take place in 2 modes "to the full" (the registry is stopped when the memory is full) and "with overwriting" (the oldest recordings are deleted when the memory is full).

Except for storing the measurement data in the set registry periods the recorder LB-520T can form a histogram, which encloses information about the occurrence statistics of the registered measurement values in the set intervals.
In standard, for the temperature the scope of measurement was divided to 63 intervals each 2°C width and the humidity scope was divided to 50 scopes each 2 % width. There are also other widths available. Knowing a certain histogram helps the user on quick measurement result analysis performed during the registry process without the need of reading the whole device memory content.

The recorder LB-520T allows on setting the threshold temperature values (in version LB-520 also humidity) where exceeding them during a registry session is signaled on the screen, it is possible to automatically register the time interval where the thresholds were exceeded.

Thermometer - Hygrometer- Barometer LB-707 with a SMS and GPRS function

The panel LB-707 is a measuring microcomputer, which attends the outside temperature and humidity probes. The built in inside the device GSM/GPRS mode allows on wireless communication using SMS messages and a GPRS channel. The panel is equipped with an electronic measurement memory, LCD screen and a keyboard. Termometr LB-707

The meter is designed for monitoring climate parameters in rooms, chambers, refrigerators as well as temperature (solid bodies and liquids) depending on the probe casing construction. It can be used as a recorder in transport or as a device used for process documentation device. The panel allows on parameter registry lasting for many days with a possibility of later reading. When using registry through GPRS it is possible to follow in real time measurement results from every location where the GSM system is available. It is possible for the device to supervise the temperature and humidity as well as send warning messages to the mobile phones. It is also possible for the panel to monitor the power supply status of other devices by sending alarms informing about the lack of network power supply.

The panel LB-707 can work in the following measurement configurations:
  1. LB-707T with a probe LB-754T as a double electronic thermometer *)
  2. LB-707T with a probe LB-754J as a single electronic thermometer *)
  3. LB-707 with a probe LB-701 as an electronic thermo hygrometer (optionally equipped with an internal barometric module LB-707B)
  4. LB-707T with a probe LB-754P as an electronic thermo psychrometer *)
*) for configurations marked in such way there is a possibility of using an interchangeable probe LB-754(T/J/P) and LB-701 however without the barometric option.

One or two channel thermometer LB-754J/T with a registering panel LB-706T and a printer

Termometr LB-706T Termometr - drukarka rejestrujca


The thermometer LB-754J/T with a panel LB-706T is a device designed for measurement, visualization and temperature results registry. Different sensor versions cooperating with the panel LB-706T allow on air temperature measurement of gas, liquids or solids. We offer two meter versions: one channel thermometer (with a single sensor LB-754J) or two channels thermometer (with a double sensor LB-754T).

The measurement results are presented on an alphanumeric LCD screen and can be sent outside through an interface RS-232. The thermometer has an option of data registry in the internal measurement memory history and later rewriting the measurement results to an outside device using a communication interface RS-232. A thermal printer can be attached to the interface, modem LB-430 for radio GSM / GPRS transmission or a PC computer. PC computer software (in the set) allows on printing reports from the measurement registry stored in the memory.

It is possible to print the measurement reports covering the chosen period of time on the attached to the panel LB-706T thermal printer.

The measurement devices produced by the LAB-EL company are provided with the individual calibration certificates from the laboratories of the following institutions:

  • LAB-EL company calibration laboratory
  • The Energy Institute in Warsaw
  • The Central Army Meteorology Office in Zielonka (for devices used in the Army).
A full offer of the LAB-EL company along with the basic device technical data is available on the Internet site: http://www.label.com.pl/.
CLIMATE IS FAVORABLE IN TRANSPORT
Ocena produktu
Monitoring
Temperature supervision in the means of transportation; HACCP; measurements: temperture, humidity, registry, alarming; GPRS, GPS; supervision, control,
Ocena: 5/5, liczba głosów: 14
  • dodaj swoją ocenę
  •