www.label.pl | LAB-EL Elektronika Laboratoryjna
Laboratory Electronics

TEMPERATURE SENSORS for electronic thermometers


  • different construction versions
  • different scope of temperatures
  • various usage


External temperature sensor casings with a thermo-resistor Pt1000 (or upon a special request Pt100)) for thermometers LB-471T, LB-701T, LB-706T, LB-708T, LB-708TR, LB-710T, LB-710DT, LB-711, LB-754J i LB-754T. The sensors can be made in different construction versions that define the scope of work temperatures and the range of usage. A client defines type and length of a cable connecting a sensor’s casing with a reading panel. The standard version of a sensor’s cable is 1 m in length, other lengths upon a request.

The scope of measurement of a thermometer with a sensor is not bigger than thermometer scope of measurement and not bigger than the scope of sensor work temperatures. The scope of temperatures provided below concerns a sensor’s ending where a thermo-resistor is located. The scope of sensors temperatures from the cable’s input side is limited by the scope of temperatures of a cable coming from a sensor. The sensor can be immersed in a medium of temperature enclosed in the scope of sensor work temperatures only to such depth so its end from the input’s side does not exceed the cable work temperatures.

TEMPERATURE SENSOR TL-1
Type Scope of temperatures Overall dimensions Usage, comments
TL-1 -40..+85°C diameter 23 mm, L=192 mm For air. Plastic casing (ABS). Standard cable work temperature (PCV): -5..+70°C (without bending: -30..+80°C).
Termometr TL-1
TEMPERATURE SENSORS TL-2, TL-3, TL-4
Type Scope of temperatures Overall dimensions Usage, comments
TL-2 -60..+80°C diameter 6 mm, L=67...250 mm (standard 100 mm For liquids, semi fluid masses, ground, air. Casing made out of stainless steel, PCV cable, seal connection using a thermo-shrinkable jacket. Standard cable work temperature: -5..+70°C (without bending: -30..+80°C).
TL-3 diameter 10 mm, L=200...800 mm (standard 400 mm)
TL-4 diameter 4,1 mm, L=60...150 mm (standard 100 mm)
Termometr TL-2
TEMPERATURE SENSOR TA-PL
Type Scope of temperatures Overall dimensions Usage, comments
TA-PL-3
TA-PL-4
TA-PL-5
TA-PL-6
TA-PL-8
TA-PL-10
-50..+250°C
-100..+250°C
-50..+400°C
diameter: 3, 4, 5, 6, 8,
albo 10 mm,

L=100...1000 mm
For gases and liquids in containers. Cable output form sensors – straight or angular.

Scope of cable work temperatures: standard (PCV): -20..+80°C, silicone: -50..+200°C, teflon: -100..+250°C, from glass fiber: -100..+400°C.


Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

There is a possibility of making such sensor in a waterproof version.
Termometr TA-PL-prostyTA-PL-straight
Termometr TA-PL-ktowyTA-PL-angular
TEMPERATURE SENSOR TA-PK
Type Scope of temperatures Overall dimensions Usage, comments
TA-PK-4
-50..+250°C
-100..+250°C
-50..+400°C
diameter 4 mm,
L=100...1000 mm
For gases and liquids in containers. Sensor casing is made out of stainless steel. A connector pipe type K2 made out of stainless steel or type K5 - from brass, nickel is used for attaching. Cable output form sensors – straight or angular.

Scope of cable work temperatures: standard (PCV): -20..+80°C, silicone: -50..+200°C, teflon: -100..+250°C, from glass fiber: -100..+400°C.

Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

There is a possibility of making such sensor in a waterproof version.
TA-PK-6
diameter 6 mm,
L=100...1000 mm
TA-PK-8
diameter 8 mm,
L=100...1000mm
Termometr TA-PKTA-PK-straight
Termometr TA-PKTA-PK-angular

TEMPERATURE SENSOR TA-PM
Type Scope of temperatures Overall dimensions Usage, comments
TA-PM-3
-50..+180°C
-50..+250°C
diameter 3 m,
L=50...500 mm
For soft mass (i.e. meat) in meat processing chambers.

Handle scope of work temperatures; from silicone: maximum 180°C, from teflon and stainless steel: maximum +250°C.

Scope of cable work temperatures: silicone: -50..+200°C, teflon: -100..+250°C.

Sensor is waterproof.
TA-PM-4 diameter 4 mm,
L=50...500 mm
TA-PM-5 diameter 5 mm,
L=50...500mm
TA-PM-silikonTA-PM-silicone
TA-PM-stalTA-PM-steel
TA-PM-teflonTA-PM-teflon
TEMPERATURE SENSORS TA-PD
Type Scope of temperatures Overall dimensions Usage, comments
TA-PD-4 -50..+250°C
-100..+250°C
-50..+400°C
diameter 4 mm,
hole 3,2 mm
Block surface temperature measurement, device parts or various construction elements.

Scope of cable work temperatures: standard (PCV): -20..+80°C, silicone: -50..+200°C, teflon: -100..+250°C, from glass fiber: -100..+400°C.


Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

There is a possibility of making such sensor in a waterproof version.
TA-PD-5 diameter 5 mm,
hole 3,2 mm
TA-PD-6 diameter 6 mm,
hole 4,2 mm
Termometr TA-PD-5TA-PD-5
TEMPERATURE SENSORS TP-111, TP-112 and TP-113
Type Scope of temperatures Overall dimensions Usage, comments
TP-111 -100..+550°C diameter 4 mm,
L=100...800 mm
For liquids, semi-fluid masses, air.
For air temperature measurement (made especially with a terminal TP-113 like in TP-381, without a hole at the end).

Cable and handle work temperature -20..+80°C


Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

TP-112 diameter 5 mm,
L=100...800 mm
TP-113 diameter 6 mm,
L=100...800mm
Termometr TP-111TP-111
TEMPERATURE SENSORS TP-131 and TP-132
Type Scope of temperatures Overall dimensions Usage, comments
TP-131
TP-132
-100..+550°C L=100...400 mm For soft mass (i.e. meat).
Cable and handle work temperature -20..+80°C.
Termometr TP-131TP-131
Termometr TP-132TP-132
TEMPERATURE SENSORS TP-151 and TP-152
Type Scope of temperatures Overall dimensions Usage, comments
TP-151
TP-152
0..+180°C L=50...200 mm For soft mass (i.e. meat) in meat processing chambers.
Cable and handle work temperature 0..+180°C
Termometr TP-151TP-151
Termometr TP-152TP-152
TEMPERATURE SENSOR TP-155
Type Scope of temperatures Overall dimensions Usage, comments
TP-155 0..+150°C L=1000...2500 mm For loose materials measurement in dumps or in storage yards: coal, sawdust, peat and biomass (i.e. compost).
Cable and handle work temperature0..+150°C
Termometr TP-155TP-155
TEMPERATURE SENSORS TP-207, TP-208 and TP-209
Type Scope of temperatures Overall dimensions Usage, comments
TP-207 -200..+550°C diameter 3 mm
L=100...1000 mm
For liquids, air, surface etc.
Sensor is made out of flexible coat cable - an external casing is made out of acid-proof steel. Conductors of a cable are made out of copper with an addition of zircon. Such addition assures resistance supply stability in a wide scope of temperatures.
Cable isolation is provided by magnesium oxide.
Sensor made in such technology connects in itself advantages of high accuracy and measurement sensor resolution resistance as well as advantages of coat cable in mineral isolation that because of its flexibility and resistance to vibrations allows on measurement in hard industrial conditions.
Cable work temperature (from a liquid fiber in a steel screen) and a mediate sleeve -20..+300°C.
Upon a special request other cable isolations are possible: PCV, silicone, teflon, casing).
Scope of cable work temperatures: PCV: -20..+80°C, silicone: -50..+180°C, teflon: -80..+200°C).

Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

TP-208 diameter 5 mm
L=100...1000 mm
TP-209 diameter 6 mm
L=100...1000 mm
Termometr TP-207TP-207
TEMPERATURE SENSORS TP-361 and TP-362
Type Scope of temperatures Overall dimensions Usage, comments
TP-361
TP-362
-100..+400°C diameter 2,5, 3, 4, 6, 8 mm
L=50...800 mm
For gases and liquids in containers.
A slidable pipe is used for fastening (additional equipment).
Scope of cable work temperatures: standard (PCV): -20..+80°C, silicone: -50..+180°C, teflon: -80..+200°C.

Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

Termometr TP-361TP-361
Termometr TP-362TP-362
TEMPERATURE SENSOR TP-363
Type Scope of temperatures Overall dimensions Usage, comments
TP-363 -100..+400°C diameter 4, 6, 8 mm
L=50...1000 mm
H=50...1000 mm
For gases and liquids in containers.
A slidable pipe is used for fastening (additional equipment).
Scope of cable work temperatures: standard (PCV): -20..+80°C, silicone: -50..+180°C, teflon: -80..+200°C.

Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

There is a possibility of making such sensor in a waterproof version.
Termometr TP-363TP-363
TEMPERATURE SENSORS TP-381 and TP-382
Type Scope of temperatures Overall dimensions Usage, comments
TP-381 -100..+400°C casing diameter 6 mm,
hole diameter 4,2 mm
Block surface temperature measurement, machine parts or various construction elements.
Scope of cable work temperatures: standard (PCV): -20..+80°C, silicone: -50..+180°C, teflon: -80..+200°C.

Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

TP-382 casing diameter 4 mm,
hole diameter 3,2 mm
Termometr TP-381TP-381
TEMPERATURE SENSOR TP-383
Type Scope of temperatures Overall dimensions Usage, comments
TP-383 -50..+150°C 1,5 x 3,5 x 30 mm Electric engine winding and other device temperature measurement.
Termometr TP-383TP-383
TEMPERATURE SENSORS TP- 401, TP-402, TP-403 and TP-404
Type Scope of temperatures Overall dimensions Usage, comments
TP-401 -200..+550°C diameter 6 mm, L=100...800mm For liquids in containers.
Head work temperature -40..+100°C.
A slidable pipe and a handle clip are used for fastening.

Attention: Sensor casing – cable connection spot is not waterproof and cannot be submerged with fluids.

TP-402 diameter 8 mm, L=100...800mm
TP-403 diameter 10 mm, L=100...800mm
TP-404 diameter 12 mm, L=100...800mm
Termometr TP-401TP-401
Other sensor versions – to be agreed.
GOOD CLIMATE IS FAVORABLE